Survey & plan
We look at the property, listen to what you need and explain the most practical route before work begins.
Signal faults & equipment changes
Restore the signal before replacing the whole system.
Investigation and practical upgrades for satellite systems affected by signal loss, dish movement, damaged cables or ageing equipment.
Selected installation detail · AGF Services
Satellite Repairs & Upgrades
A clear diagnosis from dish to receiver.
Every project begins with a conversation and ends with a neat, confidently finished installation.
Talk to an installer- Signal fault finding
- Dish realignment
- LNB and cable replacement
- Receiver and remote upgrades
What to expect
A considered job, from first look to final handover.
Install with care
Equipment positions, cable routes and surrounding finishes are treated as part of the installation—not an afterthought.
Test & hand over
We test the finished system, connect the controls where required and make sure you are confident using it.
Start with the symptoms
The affected channels, weather conditions and whether one or every receiver has failed help narrow down the likely cause.
Check the outdoor equipment
Dish alignment, bracket condition, LNB and visible cabling are reviewed where safely accessible.
Check the receiver path
Connections, receiver settings and the signal reaching each television point are considered.
Upgrade only what is needed
Once the issue is understood, we explain whether adjustment, repair or equipment replacement is appropriate.
What we can install
Built around the way you live.
We'll talk through the right combination for your property, explain the options clearly and keep the finish neat.
Signal repairs
Common outdoor and cabling issues.
- Dish realignment
- LNB replacement
- Cable repair or replacement
- Bracket assessment
Equipment updates
Changes at the television and receiver end.
- Receiver connection
- Replacement remote controls
- Additional receiver feeds
- System retuning
Helpful to know
Clear information before you decide.
Before we visit
Note which channels or rooms are affected, when the problem began and whether the dish was disturbed by weather or building work.
- List affected receivers
- Share screen error messages
- Photograph accessible equipment
A clear finish and handover
We agree the scope before work begins, keep equipment and cable routes considered, test the finished installation and explain what has been completed.
- Clear recommendations
- Careful installation
- Testing and practical handover
Plan with confidence